|
Sand rail 1/2 shafts |
||||||||
|
Most axles have a 4140 heat treated spline and modified lube channels.
Miller Built get's a article In Sand Sports Sept/Oct. 2007-This was the first guy to run our axles well over a year ago and he's still running STRONG.
Our new heat sink for race-
BRIAN'S CAR FROM OREGON
2008 Built for Sand Candy - A full blow race sand car 800 horse and 21 ff 934 -
Pricing for the 1/2 shafts: #1 Cars with 930 under 250 horse $599.00 per side.
#2 Cars with 930 most v-8 cars 250-600HORSE- new boot design $699.00 per side. The New 04-2008 sand Pro Axles
grease-able without removing the boot -and a new dual slip sleeve closer to race prep -Spreading the load out and making them last longer- Always use pro long grease on the slip for the best performance #3 934 -934.5 cars w/o limiters 850.00 per side add 100$ for mid board conversions. call for torque limiters ******************************
Powder coating is available for $139.00 for both takes 2 days. RACE PREP. Includes polished spline -5 times more lube and aluminum heat sink for slip - Add 300$ per side- The heat sink dramatically reduces heat - aprox 50 degree's at 1000 rpms in 30 seconds !!
THIS 1/2 SHAFT ABOVE IS GOING IN THE NEW TRICK RACING CAR -
FULLY BALANCED ! We now have a new version Desert race - 934 and 935 - along with series 30 available - angles at 40 degree's- The replacement U joints are 200$ each- More info coming soon- These are going to be using German ELBE parts-near 1610 series -4 ton -
HERE'S THE LINK FOR WIRE- http://www.ultralightnews.com/pilotslounge/safetywire.h
THESE ARE MAINLY USED ON 934 THRU SERIES 30 AND WITH LARGER TRANSAXLES -FORTIN -ALBINS AND MENDEOLA + XTRAC
HERE'S THE 700 HORSE TEST RIG FOR THE 934 WITH LIMITERS
THESE ARE MID BOARD HUBS AND WE CAN MACHINE YOUR HUBS TO FIT OUR SHAFTS.
SEND this ring to convert your mid boards (we will also thread our 1/2 shafts for a clean fit )
Ray over at desert rat buggies has been a loyal customer for a year-check out his cars-I know he has great service ! THIS IS OUR SMALLER VERSION AXLES INSTALLED BELOW At the sss show 09-2007
One of our shops we sell to here- c-moore off road http://www.cmooreoffroad.com/index.html
|
||||||||
